How To Make A Fabric Scandinavian Heart
Make a set of these Scandinavian hearts with this tutorial from quilt artist Charlotte Warr Anderson.
Scandinavian Hearts are a popular holiday item. It is an old Scandinavian tradition to make woven paper or felt hearts to fill with candies or nuts and put on the Christmas tree. They tend to be ubiquitous. Perhaps you made them in school out of paper. I made a stenciled version for Christmas ornaments. I’ve seen YouTube videos where the hearts are made with felt. All of these materials, paint, paper and felt, turn out well. But they are simple to create and not necessarily worthy of keeping indefinitely.
I propose that one can use a fancier fabric, do a bit more finishing and decorative work, and create a keepsake; a gift that someone will be willing to stash amongst personal treasures. I enjoy utilizing other than cotton fabric so I’ve picked satin for my heart.
Materials to make a fabric Scandinavian heart:
- 6″ x 45″ strips each of red and white satin, or colors of your choice (The red satin I bought did not have as much body as the white. I used a light weight, non-woven, iron-on interfacing to stabilize the red fabric and give it a similar weight to the white.)
- 7″ square of medium weight iron-on interfacing
- 4″ x 3″ template plastic
- Thread to match
- Small tassel and 8″ cord
- Download the Fabric Swedish Heart Template
Trace pattern on the template plastic and cut the shape out. Cut 4 rectangles of each color of satin 4″ x 3.5″.
Trace the template on to the medium interfacing 4 times with approximately ½” between them. Cut them apart leaving ¼” outside the lines for seam allowance.
Iron 2 of these on the red and 2 on the white. The other 2 rectangles do not need to have the pattern drawn on them.
The red section will be illustrated now. Make a ¼” fold on the long side of the rectangles without the pattern. Press the fold in place.
Place pins parallel to the straight line on the interfacing through the single piece only.
Use these pins to align the folded edge of the second rectangle to the straight line.
Pin around the half circle making sure both layers are flat.
Starting at the edge of the fabric stitch around the half circle and stitch off the other side.
Use presser foot #20 so you can see to stitch exactly on the drawn line. Do not sew along straight edge.
Trim seam allowance to a scant ¼”. Notch out the curve.
Turn the piece outside in and press.
This is what each side looks like.
Set these aside for now. Cut a strip of the red satin 2″ x 28″. Fold this strip in half. Place the edges on the ¼” mark on the throat plate of the machine. Move the needle position one click to the left. This will make the finished strip slightly less than ¾” wide.
Stitch down the length of the strip. This creates a tube that will need to be turned. Before turning, it is desirable to have the seam pressed open.
Once turned the tube will need to be pressed flat.
Cut this strip into four 6 1/2″ pieces.
Pin these 4 strips to the extending seam allowance of the half circle.
The photo shows one pin in each strip. (It’s better to stabilize the strips with 2 pins.) Place 2 strips on the outside corners with a pin so that the edges of 2 strips touch the corner seam, then space the remaining 2 strips evenly across the seam allowance. Then place the second pin in each strip.
Sew the strips on to the half circle next to the fold taking caution not to stitch on the edge of the fold.
Trim off the corners of this seam.
Bring the folded over the ends of the strips and pin in place. The fold should cover the last stitching line.
Topstitch 1/16″ inside the seam line. (Pins are underneath)
It should look like this after stitching.
Repeat for second half circle at the other end of the strips. Then make the white section repeating these instructions.
Fold the 2 sections in half and press, forming loops.
Begin to weave the 2 sections together.
The purpose is to form a checkerboard pattern. Run the first red loop on the inside of the first white loop. Then the first red loop goes around the outside of the second white loop.
Do the opposite with the second loop. Proceed with weaving as shown in photos.
The last photo looks like it is correctly done. But when I turn it over on the opposite side I see I have made a mistake.
Since I made the error on the first row I need to unweave the sections and begin again. Once the heart is rewoven it looks like this on either side; front and back sides are mirror images of each other.
This heart is attractive but is it keepsake worthy? Let’s do a little more work and make it even more special. Before weaving together the red and white sections, lay the 2 pieces flat and apply an iron-on tear-away stabilizer to the wrong side of each section. (The side that has seam lines in the middle of the strips.)
Choose a contrasting thread for each section. Use Open embroidery foot #20/#20C/#20D. The seam guide is loaded on the back of the foot to use for stitching the inside round. Pick a fitting decorative stitch. I picked #642. Center the presser foot at the top of the outside strip and begin stitching.
Continue stitching around the shape until the line meets the beginning to create an oval. (You can choose to go to the effort to make the decorative stitch match perfectly at the join. I did not feel the need to.) Repeat for stitching of the inside oval using the seam guide to aid in keeping the line straight.
Once the decorative stitching is complete tear away the stabilizer.
Remove as much of the stabilizer as you can. Stitch the white section. Both sections are completed in reversed colors.
Fold the 2 sections in half and press.
Weave as previously instructed.
Hand stitch the corners of the heart where the half circle joins the outside strip.
This will permanently join the sections. Two more items are needed to finish this keepsake: a tassel at the bottom of the heart a cord or braid for the handle.
This makes a lovely ornament.
Here are some ideas for personalizing the heart. Place a small card inside, a photograph fits nicely in the pocket, or it can be the perfect place for a pouch of potpourri.
Your friends and loved ones will appreciate the extra effort and cherish this memento.